Technicial Specifications

1- Raw Material: AA 6063 (AlMgSi 0.5 F22), EN 573-3

2-  Mechanical Properties: EN 755-2

• Elasticity Modul: 7000 kN/cm²
• Yield Strenght: 215 N/mm²
• Flow Strenght: 160 N/mm²
• Elongation: minimum 6 %
• Hardness: 70

3- HRB Barrier Raw Material

1. PA 66 GF 25 (25 % the manufactured from glass stiffened polyamid): Placed into the aluminium profiles before anodic oxidation and powder coating.
2. PVC: Placed into the aluminium profiles after anodic oxidation and powder coating. PVC insulation bars are 10 % heavier than Polyamid insulation bars .

4- Anodic Oxidation

• The Standarts of Technical Delivery Terms Regarding Eloxal Products: DIN 17611, EN 12371-1 (QUALANOD)
• Thickness of Eloxal Coating: 10-15 mikron, EN ISO 2360
• The Standarts of Immersion Coloring: DIN 50018
• Sealing Standarts: EN 12373-5, ISO 3210 (TS 2676)

5- The Standarts of Powder Coating

• Thickness: min. 60 mikron
• Adhesion: EN ISO 2409
• Elasticity: EN ISO 1519
• Deformation: EN ISO 6272-1
• Hardness: EN ISO 2815

6- Surface Appearance: By visual observation, there has been no defects seen on the surface, such as stratches cramped shapes, swellings, stain etc. on the exposed areas.

7- All gaskets

• Raw material: EPDM
• Raw material of Gaskets for suture: Silicone
• Measurement Tolerances Standarts: DIN ISO 3302-1/E2
• Quality Control Standart: RAL-GZ 716

8- Measurement Tolerances Standarts for Profile Design and Manufacturing: EN 12020-2, EN 755-9